Homeowners need to know that together with planning and patience and skill, they ought to have specialized equipment as well when considering hardwood floor refinishing. Out of all the home improvement projects that homeowners can undertake, this one is something that requires research, knowledge and time. You will go through different steps or stages that include preparing, evaluating, sanding as well as sealing your hardwood floors.
In any of the said stages or steps, even a slight touch of error is enough to cause problems that can last for a long time. Yes, you could refinish the entire hardwood flooring on your own but, it is recommended that you get some help at some stages. For this kind of flooring, expect that it will take you 1 to 3 weeks to carry out refinishing.
Step 1. Checking the hardwood floor – you’ll have to determine whether or not the hardwood floor planks will be a laborious process. You have to assess if the floor suffered from water, pet urine or spills. In an effort to see if the boards are very thin to be sanded, you can pull up one threshold of the door. In addition to that, it is vital that you find out if the last sealant was varnish, wax or polyurethane. Of course, to know if the hardwood flooring have deep gouges or dramatic wear patters, you’ve got to give it a thorough examination.
Finding Ways To Keep Up With Installations
Step 2. Preparing the flooring – you must prepare the flooring first before you do hardwood floor refinishing. If most of the hardwood planks don’t have scratches or holes, are at least 3/4 inches thick and have same amount of sealant, then you’re all set to start with the preparation.
What Almost No One Knows About Flooring
Cleaning the whole floor area is the first thing that you’ve got to do. You also have to file any holes from nails, staples or scrapes. You should pull up the thresholds and the baseboards too. Even if one of the floors doesn’t look good, you have to do all the floors to keep it consistent.
Step 3. Sanding – probably, this is the most daunting and demanding step that you will ever do. You need to rent a drum sander equipment, this is loud to use and you’ve got to roll it to the entire hardwood flooring 3x to be able to peel off the top layer of the finish.
Step 4. Staining and sealing – before you get started on this step, you have to be sure that every single bit of sawdust is gone so it doesn’t contaminate the sealing and staining applications. You need to seal it with thin layer of sealant to be certain that the stain is dry before application once you are done staining the flooring.